When you don’t need dishwasher repair, you probably need a new one. Dishwashers can get old, malfunction and breakdown after using it over time.

Check out the signs that signal you that you need a new dishwasher since repair is not an option anymore:

You see obvious rusts.

Rusts outside your dishwasher don’t call for immediate attention unless you want to get rid of it. However, when rusts start to accumulate inside, it’s something that you need to focus on.

Rusts inside the machine can signal that there is water leakage or some parts are already decaying. Moreover, the rusts can get into the plates which are alarming.

To check if it’s the dishwasher that causes the rust, drop citric acid. Run it as usual while it is empty. The rusts should be removed.

The door doesn’t lock.

A broken dishwasher’s door can signal that you need to buy a new one. However, you need to do a quick check first or call a service technician before doing so.

Unlocked doors will prevent your dishwasher from doing its function. Doors must be secured to prevent water leakage.

Call a technician to check the latch. They can recommend a replacement of the latch if parts are available. If your unit is relatively new, it may still be under warranty.

If it’s a very old unit, replacing the latch can be impossible. It may be hard for you to find the same parts of your dishwasher. If this is the case, investing a new dishwasher can be your only option.

Water is leaking.

You need to be alarmed when you start seeing water all around the floor. Dishwashers should not have any leakage.

If you see water around the unit, inspect where the water is coming from. You need to address it as soon as possible to prevent bigger issues.

Begin by turning off the water source. Dry all the surface. Use a powerful fan or dehumidifier to dry all areas before calling a technician.

The technician may suggest repair to fix the problem. However, if it’s impossible to repair, buying a new unit can be the best option.

Dishes are still dirty after a wash cycle.

Dishes should come out clean after the cycle. Usually, this issue is easy to manage without the need for replacing the unit.

Sometimes, dishes remain dirty or spotty after a wash cycle because of improper loading of dishes, use of hard water or different detergent, or foods stick hard on plates. Address these problems if one of them is causing this issue.

If you already did all the necessary actions including calling a technician, it may be a sign that you need a new dishwasher. If your unit starts to do it often, it may be a sign of malfunctioning that is beyond repair.

The dishwasher is creating unusual noise.

Does your dishwasher start creating extraordinary noise? It can be a signal that you need a new unit.

Most problems associated with a noisy dishwasher are caused by a damaged motor. A new motor can be costly.

It is better to buy a new unit of dishwasher rather than replacing the motor. Buying a motor is as good as buying a new unit.

The dishwasher is old.

When your dishwasher is older than 10 years, maybe it’s time to have an upgrade. Older models are not as efficient as modern ones.

Buying a new dishwasher can save you money in the long run. New models are more energy efficient. It can also lower the cost of your water bill.

This issue is totally easy to manage. If you want to upgrade, it all depends on you. Canvass for prices, models, and efficiency before buying a new dishwasher.

The dishes are not hot to touch after the cycle.

The FDA recommends that dishes must be washed in a dishwasher that can maintain a temperature of 171°F. After the washing cycle, plates must be hot to touch.

If they are not hot after the cycle, something is wrong with the unit. It is important that your dishwasher maintains that temperature for cleaning and sanitizing purposes.

Call a technician. The heating coil may be replaced. However, if nothing seems to work after all the tests, it is better to buy a new unit.

If you encounter these issues with your dishwasher, it’s up to you to decide to have it repaired or replace it with a new unit. You may want to consider its age and the cost of repair. If the repair costs more, it’s better to invest in a new unit.